Power your battery. Power your journey
The Philips JS5610 is a powerful battery that instantly jump starts a drained car battery, and charges your portable devices. Eight safety features, premium cables, an LED display and integrated light make the device safe and easy-to-use.
See all benefitsPower your battery. Power your journey
Powerful jump starter keeps your car on the road
The Philips JS5610 is equipped with a powerful lithium battery that can discharge up to 35C, while meeting safety standard UN38.3. The 2300A peak can easily start most 12V petrol vehicles up to 8.5 litres, and diesel vehicles up to 6 litres.** Fully charged, it can jump start a flat vehicle battery 25 times for petrol cars. * It can also handle the cold, functioning when the temperature is as low as -20° Celsius.
The Philips JS5610 has a user-friendly 3.2-inch LED display that provides you with helpful operational guidance. If you incorrectly attach the clips to the wrong battery terminal, the screen will promptly display a warning message, keeping you informed and safe. When everything is set up correctly, you will see a notification that you can safely start. With this helpful guidance, it’s easy to jump start your car with confidence.
The in-built LED screen displays a range of useful information. As well as operational reminders, it shows the input and output power levels, and remaining battery capacity. This means you can easily check the status of the battery, or any portable devices you’re charging. With Small Current Mode, the JS5610 also supports the charging of devices that require a small current, such as headphones and smart watches.
With its integrated waterproof all-luminous surface LED floodlight, you can easily operate the Philips JS5610 at night. you choose from various modes (ON, Strobe ,SOS, Off) according to the conditions. Plus, the light automatically switches off after 12 hours of inactivity to prevent the battery accidentally draining.
Designed with 8 safety features including protections for Over-temperature, Reverse-polarity, Reverse-charge, Over-voltage, Over-current, Over-discharge, Over-charge and Short-circuit, the Philips JS5610 protects you from harm, while protecting itself and your vehicle from damage. Even if the clamps are attached incorrectly or connected together, you’re fully protected. The device guards against excessive voltage or current discharge and automatically shuts off if it detects excessive temperature to prevent overheating.
Equipped with a 59.2Wh safe lithium-ion battery pack, Philips JS5610 is a high-capacity power bank. Featuring a PD100W USB-C outlet, a 150W DC outlet, and two USB-A ports, it can fully and quickly charge a wide range of portable devices. For example, it can charge a smartphone up to 6 times****. With a 100W USB-C input port, you can fully charge the JS5610 within 45mins.**** It can go from fully drained to jump starting a dead car battery with only 8 minutes of charging****. Plus, with up to 1,000 charging cycles, the battery has a long lifespan.
Connect the clamps of the Philips JS5610 to your car battery and the screen will display the voltage of that battery in real-time. When it detects a car battery with a low voltage, a warning icon will flash on screen, notifying you that you need to charge or double check that battery. Regular checks like this help you maintain a healthy battery, so you’re never stuck without your car when you need it most.
The Philips JS5610 jump starter is a highly durable device built to survive in tough conditions. It boasts a high level of water and dust resistance, up to IP65 ***. It reaches the high impact resistance standard IK10, also it can withstand a drop from 1.0-meters. And the shell is made from engineering plastics with a high fire resistance rating of UL94 V0. So even if you're using the device in harsh conditions, you can still jump start your car and get to your destination on time.
Made from thickened and reinforced pure copper wires, wrapped in a durable braided nylon coating, the jump-starting cables are more wear-resistant, less prone to damage, and have a longer lifespan. The battery clamps are also built to exacting standards. Having passed rigorous salt spray testing with high corrosion resistance, they ensure good contact with the pole on the car battery, even after prolonged exposure to harsh environments. Sparks-free design, combined with the protection of the device, makes it safer to use.
With its advanced design, and a current as low as 20 μA, the Philips JS5610 jump starter battery experiences minimal drainage while in standby mode. So you don’t have to worry about the battery depleting, even if there 2.5 years in between jump starts.*****
Product description
UL94 V0 ABS
ON, SOS, Strobe OFF
LED
1 meter
1000 circles
28cm
IP65
IK10
-20°C to 55°C
UL,CP65,FCC,RCM,ICES
Electrical characteristics
59.2Wh(16000) mAh
Li-ion battery
CP3500 12V
600A
2300A
18W
PD 100W
45 mins
Product description
UL94 V0 ABS
ON, SOS, Strobe OFF
LED
1 meter
1000 circles
28cm
IP65
IK10
-20°C to 55°C
UL,CP65,FCC,RCM,ICES
Electrical characteristics
59.2Wh(16000) mAh
Li-ion battery
CP3500 12V
600A
2300A
18W
PD 100W
45 mins
Ordering information
LUMJS5610X1
78004648
046678004643
50046678004648
Packed product information
4
850g
230*100*49mm
255*125*105mm